Concrete Foundations & Slabs in Wyoming

The structural backbone of your home or building — poured right the first time, built for Wyoming's soil conditions and frost depths.

Call for a Free Estimate
Foundations & Slabs

Wyoming Foundations That Start Right

Every structure is only as good as the foundation beneath it. In Wyoming, that means accounting for our deep frost lines, varying soil conditions across Fremont and Hot Springs counties, and the kind of structural loads that come with full-size homes, garages, shops, and outbuildings.

Day Concrete LLC has been pouring foundations and slabs across the Wind River region for over 20 years. We understand Wyoming soil, we pull proper permits, and we don't cut corners on rebar placement, concrete mix design, or curing time. The foundation work we do today determines how your structure performs for the next 50 years.

Site evaluation and soil assessment before any work begins
Footings poured to proper frost depth for Wyoming winters
Rebar placed and tied to engineering specifications
Formwork set level and square for accurate dimensions
High-strength concrete mix appropriate for structural applications
Proper curing process for maximum long-term strength
Foundation pour in Dubois, Wyoming
Foundation Types

We Pour Every Type of Slab and Foundation

From a simple garage slab to a full residential foundation, we have the experience to get it done right.

🏠

Slab-on-Grade

The most common foundation type for homes, shops, and garages in Wyoming. We pour a reinforced concrete slab directly on a prepared and compacted gravel base, with footings extending below the frost line where required.

🏚️

Crawl Space Foundations

Stem wall foundations that elevate the structure above grade and create a crawl space below. Common in parts of Fremont County and necessary for certain building configurations. We form and pour the stem walls and footings.

🚗

Garage & Shop Slabs

A properly poured garage or shop slab can handle decades of heavy vehicle traffic, floor jacks, compressors, and equipment. We pour 4" to 6" slabs with proper reinforcement and saw-cut control joints.

🏗️

Monolithic Slabs

A slab and footing poured as one continuous piece — efficient and cost-effective for smaller structures. The thickened edges act as the footing while the interior slab carries floor loads.

🔧

Equipment Pads

Reinforced concrete pads for HVAC units, generators, pressure tanks, or agricultural equipment. Designed for static load requirements and poured level and true to your specifications.

🏢

Commercial Foundations

We work on commercial and agricultural buildings throughout the region. Larger footprints, heavier loads, and tighter tolerances — we have the experience and equipment to handle them all.

Concrete forms being set in Dubois, Wyoming
Why Experience Matters

Wyoming Foundations Are Not One-Size-Fits-All

Soil conditions vary widely across Fremont and Hot Springs counties. The soils in Riverton behave differently than those near Lander or Dubois. Frost depth requirements, drainage conditions, and load requirements all affect how a foundation should be designed and poured.

over 20 years of experience in this region means we've seen every situation — expansive soils, high groundwater, rocky substrate, sloped sites. We ask the right questions before we pour the first yard of concrete, so there are no surprises after the structure goes up.

Frost line experience — Wyoming requires deeper footings than warmer states
Knowledge of local soil types across Fremont & Hot Springs counties
Proper formwork for square, level, and accurate dimensions
Rebar specification and placement done correctly the first time
Works with your builder, engineer, or inspector as needed
Call for a Free Estimate
Recent Work

Foundation Projects Across Wyoming

Starting a New Build? Call Us First.

A foundation poured right the first time saves you from problems that are expensive and painful to fix later. Get a free estimate today.